switch show

This command displays details of a specific switch.

Usage

switch show --id ID

Required Parameters

--id ID

Specifies which switch to display.

Example

vcli: admin> switch show --id 1
+-------------+----------------------------------------------+
| ID          | 1                                            |
| Title       | rack3-1: switch-MSN3700-VS2FC (MT2436J001X0) |
| Ip          | 10.27.103.153                                |
| Model       | MSN3700-VS2FC                                |
| Sn          | MT2436J001X0                                 |
| State       | OK                                           |
| Switch-type | cumulus                                      |
+-------------+----------------------------------------------+

Command Output

`ID`	The VMS ID of the switch.
`Title`	The descriptive name of the switch.
`Ip`	The IP address of the switch.
`Model`	The switch model.
`Sn`	The switch serial number.
`State`	State. Values vary according to vendor.
`Switch-type`	The switch vendor. Possible values: `arista` `mellanox` `mellanox-os` `aruba` `cumulus`