port show

This command displays details of a specific switch port.

Usage

port show --id ID

Required Parameters

--id ID

Specifies which port to display.

Example

vcli: admin> port show --id 36
+--------+----------------------------------------------+
| ID     | 36                                           |
| Title  | PORT Port swp9                               |
| Model  | PORT                                         |
| Speed  | 100G                                         |
| MTU    | 9216                                         |
| State  | up                                           |
| Switch | rack3-2: switch-MSN3700-VS2FC (MT2436J001XU) |
+--------+----------------------------------------------+

Command Output

`ID`	The VMS ID of the switch port.
`Title`	A composite title that includes the Model value and the Name value.
`Model`	The mode in which the port is configured. Possible values: `PORT` `MLAG` `CHANNEL`
`Speed`	The speed configured on the port.
`MTU`	The MTU configured on the port.
`State`	The state of the port, as fetched from the switch. Values may very with vendor.
`Switch`	The switch to which the port belongs.