dtray led

  • Updated on Jan 30, 2026
  • Published on Jan 28, 2026
  • 1 minute(s) read
Prev Next

This command makes all the DTray LEDs blink or turn them off.

Usage
dtray led --id ID
          {--on|--of}
Required Parameters

--id ID

Specify the DTray ID.

--on|--off

Sets the state of DTray LEDs:

  • on. The LEDs start blinking.

  • off. The LEDs go off.

Example

This example shows turning off the LEDs on DTray 1:

vcli: admin> dtray led --id 1 --off
Related articles
  • dtray led
    VAST Cluster > Version 5.3 > VAST Cluster 5.3 CLI Command Reference > dtray commands
  • dtray led
    VAST Cluster > Version 5.0 > VAST Cluster 5.0 CLI Command Reference > dtray commands
  • dtray led
    VAST Cluster > Version 5.2 > VAST Cluster 5.2 CLI Command Reference > dtray commands